uitable for yearly maintenance and participating a bicycle rally. We dismantle all parts, Wash them with bio-degreaser, check worn out, alignment and function. And if it is needed, we reaming, facing and tapping it.
e recommend this for quarterly maintenance. The same as the full overhaul except threading, reaming, facing and alignments. (Kindly see the detail overhaul steps below. The step.3 and 6 are not included in the semi overhaul service)
Take apart all parts from a frame.
Wash out all grease, lubricants and dirties.
We only use non-toxic and non-flammable degreaser.
We check threaded holes and faces of BB and headtube.
When it is needed, we do proper work on it.
Lubricate oil and put grease on the part.
For reducing friction, we put anti-seize compound on press-fit parts.
And put assembly compound on carbon seat post to increase grip.
We install all the part following proper torque.
When it is needed, we use thread locker on bolts.
We check a frame, dropouts, hanger alignment.
Then we check the worn out of a chain, cassette sprockets.
Wheels also will be checked radially, laterally and centering aspect.
Each spoke tension will be read. All these results are given to you.
We set up all the cables with proper tension.
Then make the shifters and brakes work perfectly.
We check all the function working.
Clean up excess oil or lubricants.
When it is needed, we ride it outside for testing.
hris King hubs are one of the best hubs. It’s different than other hubs, it is consisted of many parts and is need a dedicated tool for the service. We overhaul, check, lubricate and reassemble it properly.(except R45 type hubs)
T Swiss makes high-quality hubs. Some special tools are needed for the service. We overhaul, check, lubricate and reassemble it properly.
turmey Archer internal gears are easy to find on Brompton bicycle. Internal gears are needed to maintenance regularly especially in the humid region. We overhaul, check, lubricate and reassemble it properly. And also we install a new gear for you.